[ Datasheet Texin 260]

Property		Test Condition	Unit	Standard	Value
Rheological properties
	Mold shrinkage, flow/cross to flow	Value range based on general practical experience	in/in	ASTM D955	0.008
Mechanical properties (23 °C/50 % r. h.)
	Flexural modulus	73 °F	lb/in²	ASTM D790	43000
	Tensile strength		lb/in²	ASTM D412	6000
	Ultimate elongation		%	ASTM D412	400
	Tensile stress at 50 % elongation		lb/in²	ASTM D412	2900
	Tensile stress at 100 % elongation		lb/in²	ASTM D412	3000
	Tensile stress at 300 % elongation		lb/in²	ASTM D412	4300
	Compression set, as molded	22 h at 73 °F	%	ASTM D395-B	27
	Compression set, as molded	22 h at 158 °F	%	ASTM D395-B	55
	Compression set, post-cured	22 h at 73 °F; post-cured 16 h at 230 °F	%	ASTM D395-B	21
	Compression set, post-cured	22 h at 158 °F; post-cured 16 h at 230 °F	%	ASTM D395-B	35
	Compressive load	2% deflection	lb/in²	ASTM D575	50
	Compressive load	5% deflection	lb/in²	ASTM D575	525
	Compressive load	10% deflection	lb/in²	ASTM D575	1370
	Compressive load	15% deflection	lb/in²	ASTM D575	1950
	Compressive load	20% deflection	lb/in²	ASTM D575	2520
	Compressive load	25% deflection	lb/in²	ASTM D575	3150
	Compressive load	50% deflection	lb/in²	ASTM D575	7785
	Tear strength, Die C		lbf/in	ASTM D624	1000
Thermal properties
	Glass transition temperature	DMA=Dynamic Mechanical Analysis	°F	DMA	5.0
	Low-temperature brittle point		°F	ASTM D746	< -90
	Deflection temperature under load	66 psi	°F	ASTM D648	140
	Vicat softening temperature	Rate A; 1 kg; 50 °C/h	°F	ASTM D1525	374
	Coefficient of linear thermal expansion, flow/cross-flow		in/in/°F	ASTM D696	0.00007
Other properties (23 °C)
	Specific gravity		-	ASTM D792	1.22
	Shore hardness		D Scale	ASTM D2240	60
	Taber abrasion	H-18 wheel; 1,000-g; 1,000 cycles	mg Loss	ASTM D3489	50
	Bayshore resilience		%	ASTM D2632	35

Disclaimer

Aromatic polyester-based thermoplastic polyurethane with Shore D hardness of approximately 60 for injection molding. Extrusion not recommended., Typical applications include toplifts, casters, grommets, and seals.

Datasheet-Download

en